Products manufactured or sold in Belarus must meet the requirements of various technical regulations.
There are three systems of technical regulation in the Republic of Belarus:

Reform of the Technical Regulation within the Customs Union and EAEU

EAC Zertifikat, EAC Zertifizierung, EAC Deklarierung, EAC Deklaration

As a consequence of the coordination of national safety standards between Russia, Belarus and Kazakhstan, the previous national Technical Regulations such as Russian GOST and TR certification were gradually phased out and substituted by the new Technical Regulations of the EAEU (TR EAEU) in every industrial sector. In addition to the EAC certification, the EAC declarartion has also been introduced in the Customs Union as a simpler and less expensive form of proof of conformity.

The new system was modelled on the european CE marking and many Technical Regulations are coordinated with EU guidelines. One can say that the Technical Regulations of the Customs Union correspond to the EU guidelines.

National Norms in the Republic of Belarus (GOST, STB)

The list of goods for which mandatory certification according to national standards is required in the Republic of Belarus can be found in the attachement to the
Decree of the Council of Ministers of the Republic of Belarus No. 849 “On some questions of conformity assessment in the National System of Confirmation of Conformity of the Republic of Belarus“
from October 21 2016.

It contains the list of the Products subject to certification:

  • Hunting and sporting weapons
  • High voltage cables
  • Alcoholic Beverages
  • equipment for firefighters
  • electrical home appliances
  • Slot machines
  • Asynchronous (induction) three-phase motors with one speed

Technical Regulations of the Republic of Belarus

In those areas in which there are no uniform technical regulations of the Customs Union / EAEU, Belarus has its own national requirements:

TR 2007/003/BY "Measuring equipment approved for use in the territory of the Republic of Belarus"
Came into force on 01.01.2010

The technical regulation sets requirements for measuring equipment that is approved for use in the territory of the Republic of Belarus.

TR 2009/013/BY
Buildings and constructions, building materials and construction products. Safety

Came into force on 01.08.2010

The technical regulation describes the safety requirements of buildings and construction facilities that are built and used in Belarus.

TR 2010/014/BY "Mineral fertilizers. Safety"
Came into force on 01.07.2011

TR 2010/025/BY "Feed and feed additives. Safety"
Came into force on 01.01.2011

TR 2013/027/BY "Information technology. Information security"
Came into force on 01.01.2014

TR 2018/024/BY "Telecommunication systems. Safety"
Came into force on 01.01.2019

Conformity mark

Conformity mark TR BY Belarus

The requirements for the conformity mark are set out in the decision of the Council of Ministers of the Republic of Belarus N 383 of May 24, 2017.

The conformity mark may only be attached to products that are manufactured in accordance with the technical regulations of the Republic of Belarus and their conformity is confirmed by a declaration or a certificate.

The conformity mark is a combination of the letters "T" and "R" placed in a frame with rounded corners. The frame is interrupted by the "BY" symbol.

The size of the conformity mark is determined by the manufacturer, the person authorized by him, or the importer.

The dimensions of the conformity mark must ensure that it is easy to read with the naked eye.

The conformity mark is attached directly to the product near the information about the manufacturer, usually on its fixed part, and must also be specified in the accompanying operating documents.

Any misleading markings, signs or inscriptions are not stated.

If other conformity marks are applied to the products, they must not impair the visibility and legibility of the conformity mark TR BY.

Required documents:

Authorised Representative

Authorised Representative Russia and EAEU
If the producer doesn't have a location in Belarus, he does not have the right to apply for a required conformity assessment of his products. In order to still be able to be the subject of a conformity assessment, the foreign producer must give a representative in Belarus power of attorney. They will defend the interests of the foreign producer when working with the certifying bodies with regard to safety and quality of products and in accordance with technical regulations.

According to current law and in accordance with technical regulations, only an entrepreneur based in Belarus may be named as an authorized representative.

Certification duration and costs

The duration and costs of certification depend on various factors, such as the type of goods, the need for laboratory tests and the complexity of general tests. The exact conditions of the certification are always determined individually on the basis of the required documents.

Applying for a certificate can take from a few days to weeks.

Delivery of the documents

If you order an EAC certificate, you will receive a copy of it via email immediately upon our successful completion of the EAC certification process. The original will be mailed to you a few days later.

Our offer

Our export consultants have many years of experience in the EAC certification process. We offer a comprehensive service package, which includes the preparation of all necessary documents, the corresponding customs handling, and the logistics. We will help you acquire necessary certificates and permits.

We offer:

Please call us or send us an email. We will provide you with a free, non-binding quote and will be glad to answer all your questions about certification in Belarus! Let us convince you of the quality of our services!

In our video, we explain what an EAC Certification is and how and where to certify or declare your products for the introduction on the EAEU market.

The EAC Certification and the EAC Declaration are complex procedures that attest your products the conformity with the technical regulations of the EAEU and require a lot of know-how. Schmidt & Schmidt will support you with the certification of your products for the EAEU market.

The EAC certificate of the Eurasian Economic Union (EAEU) is an official document, that proofs the conformity of the products with the harmonized technical regulations of the member states of the EAEU. The products, whose conformity with the technical regulations could be confirmed by the certificate of the EAEU, may be moved and sold in the whole customs area of the member states of the EAEU.

The EAC Declaration of the Eurasian Economic Union (EAEU) is an official document that proofs, that the products meet the minimum requirements of the technical regulations of the EAEU. An EAC declaration is issued by the manufacturer, importer or an authorized representative and listed in the official register. Those products, whose conformity with the technical regulations are confirmed by the declaration, have the permission to be freely moved and sold in the whole customs territory of the member states of the EAEU.

The EAC certificate can only be issued after a quality assessment, which has to be carried out by a certification body accredited in one of the member states of the Eurasian Economic Union. The certification is conducted on the basis of technical documentations, company-internal created test reports, or rather test reports provided by accredited test laboratories, as well as on basis of a manufacturing audit on site. The certificate is printed on an official pre-printed form, which has several forgery-proof elements and is authenticated by the signature and seal of an accredited body. The EAC certificate is usually issued for “complex” products that require an extensive control by the authorities.

With the EAC Declaration the manufacturer, importer or authorized representative declares the conformity of his products with the minimum requirements of the technical regulation of the Eurasian Economic Union (EAEU). As distinguished from the EAC certificate, the EAC declaration is issued by the manufacturer or importer himself. All necessary tests and analysis are or made by the manufacturer or in some cases by the laboratory. The applicant issues the EAC declaration himself on a usual piece of paper. The EAC declaration has to be listed in the uniform register of the EAEU by an accredited certification body of one of the member states of the EAEU.

Qualified team of experts and consultants

Our experts have many years of experience in export and certification

Certification of all product types

We work with clients from all branches of industry

Quick processing of orders

We handle client's needs individually and process the requests quickly

Profound knowledge of technical regulations

Due to our technical and legal know-how, we guarantee high quality of services

Free delivery of documents

Your documents will be provided free of charge in the shortest possible time

News

The Technical Regulation TR CU 007/2011 "On the safety of the products for children and teenagers" will be changed in Russia

The Technical Regulation TR CU 007/2011 "On the safety of the products for children and teenagers" will be changed in Russia

03.05.2021

Am 30. April 2021 hat eine öffentliche Diskussion über die Entwürfe der Änderungen im TR ZU 007/2011 "Über die Sicherheit von Produkten für Kinder und Jugendliche" in Russland begonnen. Die Diskussion soll am 30. Juli 2021 enden.

The Technical Regulation for the building materials will be drawn up by the EAEU

The Technical Regulation for the building materials will be drawn up by the EAEU

28.04.2021

On April 22, the Council of the Eurasian Economic Commission approved a new version of the plan to develop and amend the Technical Regulations of the Eurasian Economic Union. According to the plan, 11 new Technical Regulations will be created and changes will be made to 42 existing Technical Regulations .

The Technical Regulation TR CU 032/2013 “On safety of pressure equipment” has been changed

The Technical Regulation TR CU 032/2013 “On safety of pressure equipment” has been changed

27.04.2021

At the meeting on April 22nd, the Council of the Eurasian Economic Commission decided to change the Technical Regulations TR CU "On Safety of Pressure Equipment". The changes include the terms of the Technical Regulation, the scope of the TR as well as technical corrections.

A public discussion on the drafting of procedures for the suspension, renewal, invalidation and revocation of EAC certificates and EAC declarations has started in Russia

A public discussion on the drafting of procedures for the suspension, renewal, invalidation and revocation of EAC certificates and EAC declarations has started in Russia

27.04.2021

On April 15, 2021, a draft of the government of the Russian Federation was submitted for public discussion. It concerns the procedure for the suspension, renewal, declaration of invalidity and revocation of the EAC certificates and EAC declarations.