Customs Union Certificate EAC

Currently there is no uniform official list of all products that are subject to certification, as the obligation for certification is currently regulated by a series of standards. This includes:

According to federal law № 184 "On Technical Regulation", the Technical Regulation is a document intended to set the properties of products or services as well as the processes and methods of manufacturing procedures relating thereto.

At the end of 2012, the Russian Federal Office for Technical Regulation and Metrology (Rosstandart) developed a consolidated list of products that are subject to certification and declaration according to the new Technical Regulations of the Eurasian Economic Union. Please note that this list is for informational purposes only.

List of products that are subject to EAC certification under the new Technical Regulations of the Eurasian Economic Union.

Machinery and equipment

TR

TR СU 004/2011 On safety of low-voltage equipment

The Technical Regulation describes the safety requirements for low-voltage devices and applies to all devices intended for alternating current of 50 to 1000 volts and direct current of 75 to 1500 volts. Products requiring certification include, for example, electrical household appliances, cables, electrical distributors, etc.

Learn more »

TR CU 016/2011 On safety of appliances burning gaseous fuels

TR CU 016/2011 On safety of appliances burning gaseous fuels

This Technical Regulation applies to equipment intended for food preparation, heating, hot water supply, for block-type combustion engines and gas-powered equipment with block-type combustion engines. Depending on the nature of the equipment, EAC certification is mandatory

Learn more »

TR CU 012/2011 On safety of the equipment for operation in explosive atmospheres

TR CU 012/2011 On safety of the equipment for operation in explosive atmospheres

The Technical Regulation TR CU 012/2011 describes the safety requirements for electrical and non-electrical equipment for operation in potentially explosive atmospheres. Those products require the mandatory EAC EX certificate.

Learn more »

TR CU 020/2011 On electromagnetic compatibility of technical devices

TR CU 020/2011 On electromagnetic compatibility of technical devices

The Technical Regulation TR CU 020/2011 applies to all devices that could generate electromagnetic interference or to those whose functionality is dependent on the influence of external electromagnetic interference. EAC certification is required, for example, for electrical household appliances, electrical tools or electronic musical instruments.

Learn more »

TR CU 010/2011 On safety of machinery and equipment

TR CU 010/2011 On safety of machinery and equipment

The Technical Regulation TR CU 010/2011 sets minimum requirements for the safety of machines and equipment during their entire service lives: during their construction, manufacture, installation, storage, transport, commissioning, operation, decommissioning and disposal. Depending on the nature of the product, the conformity is confirmed by an EAC certificate or an EAC declaration.

Learn more »

TR CU 032/2013 On safety of pressure equipment

TR CU 032/2013 On safety of pressure equipment

The Technical Regulation TR CU 032/2013 specifies the uniform safety requirements for the pressure equipment and their identification. The EAC certification obligation applies to pressure equipment of the third and fourth category.

Learn more »

Energy consuming devices

TR EAEU 048/2019 Requirements for the energy efficiency of energy consuming devices

TR EAEU 048/2019 Requirements for the energy efficiency of energy consuming devices

TR 048/2019 defines the minimal requirements for energy-consuming devices with regard to their energy efficiency. The fulfillment of those requirements is to be confirmed by an EAC certificate or an EAC declaration.

Learn more »

Rail vehicles and railway infrastructure

TR СU 001/2011 On safety of rail vehicles

TR СU 001/2011 On safety of rail vehicles

According to TR CU 001/2011 rail vehicles must prove their conformity to the technical regulation with an EAC certificate or an EAC declaration.

Learn more »

TR CU 002/2011 On safety of high speed trains

TR CU 002/2011 On safety of high speed trains

The Technical Regulation has been developed with the aim of monitoring the safety of high-speed trains and their individual parts and prescribes the mandatory certification of these.

Learn more »

TR СU 003/2011 On safety of railway infrastructure

TR СU 003/2011 On safety of railway infrastructure

This Technical Regulation describes the safety requirements for railway infrastructure: rails, power supply, telecommunication, facilities and buildings, as well as their individual parts.

Learn more »

Pyrotechnic products

TR CU 006/2011 On safety of fireworks

TR CU 006/2011 On safety of fireworks

According to TR CU 006/2011, all pyrotechnic products, which shall be sold in the EAEU, require an EAC certificate or declaration.

Learn more »

Equipment for fire protection

TR EAEU 043/2017 On requirements for fire retardants and fire-extinguishing systems

TR EAEU 043/2017 On requirements for fire retardants and fire-extinguishing systems

The technical rules stipulate safety requirements for fire retardants, fire safety and firefighting equipment. Either an EAC certificate or a declaration is required.

Learn more »

Equipment for personal protection

TR CU 019/2011 On safety of personal protective equipment

TR CU 019/2011 On safety of personal protective equipment

This Technical Regulation ensures the necessary level of protection against harmful factors and the absence of impermissible risks which could lead to situations which are dangerous. It contains rules about water production, package, storage, transportation and distribution. The certification obligation applies to the protective equipment of hazard class 2.

Learn more »

Explosives

TR CU 028/2012 On safety of explosives and products on their basis

TR CU 028/2012 On safety of explosives and products on their basis

The Technical Regulation contains binding requirements for the manufacture, application, storage and transport of explosives and products based thereon. The conformation of conformity only takes place in the form of the EAC certification.

Learn more »

Elevators

TR CU 011/2011 Elevator safety

TR CU 011/2011 Elevator safety

In accordance with the technical requirements of TR CU 011/2011, elevators must be designed, produced and installed in such a way as to ensure safety during their service lives. Conformity assessment by means of an EAC certificate is mandatory.

Learn more »

Motorways and wheeled vehicles

TR CU 014/2011 On safety of motorways

TR CU 014/2011 On safety of motorways

The TR CU 014/2011 serves the harmonisation with the European directives regarding the safety of motor roads and provides for the EAC certificate or declaration as a mandatory form of conformity assessment.

Learn more »

TR CU 018/2011 On safety of wheeled vehicles

TR CU 018/2011 On safety of wheeled vehicles

The purpose of the Technical Regulation TR CU 018/2011 is both to ensure a socially acceptable level of safety in the operation of motor vehicles, as well as to coordinate with international technical standards of safety requirements for the vehicles. Certification is required above all for safety-relevant individual parts.

Learn more »

Products for children

TR CU 007/2011 On safety of the products for children and teenagers

TR CU 007/2011 On safety of the products for children and teenagers

The Technical Regulation applies to finished, unused products which are intended for children and adolescents and are placed on the market for free circulation in a Member States of the EAEU, irrespective of the country of origin. A certification is, among others, required for hygiene articles, bed linen, underwear, outerwear etc.

Learn more »

TR CU 008/2011 On safety of toys

TR CU 008/2011 On safety of toys

The Technical Regulation of the Customs Union TR CU 008/2011 sets requirements for toys that affect the lives and health of children and their carers and aims to protect the consumer against misleading information. The products concerned must confirm their conformity with the EAC certification.

Learn more »

TR EAEU 042/2017 On safety of children's playground

TR EAEU 042/2017 On safety of children's playground

The technical rules apply to the playground equipment and floor coverings for children's playgrounds, which are introduced into the EAEU market for the first time. An EAC certificate is required for example for slides, swings, seesaws or climbing facilities.

Learn more »

Textile

TR CU 017/2011 On safety of light industry products

TR CU 017/2011 On safety of light industry products

The Technical Regulation was developed with the aim of establishing uniform and binding requirements for light industry products and to enable the free movement of products of the light industry on the common customs territory of the Eurasian Customs Union. EAC certification is mandatory for 1st layer arm and legwear, kitchen towels, underwear and bed linen.

Learn more »

Furniture

TR CU 025/2012 On safety of furniture

TR CU 025/2012 On safety of furniture

The Technical Regulation TR СU 025/2012 applies to all furniture placed on the market in the EAEU, i.e either manufactured or imported from abroad. Children's, school and kindergarten furniture is affected by the certification obligation.

Learn more »

Ships

TR CU 026/2012 On safety of small ship

TR CU 026/2012 On safety of small ships

The technical regulation TR ZU 026/2012 contains mandatory safety requirements for small vessels and their life-saving appliances and equipment, which have to confirm their conformity compulsorily and exclusively with the EAC certificate.

Learn more »

Agricultural and forestry vehicles

TR CU 031/2012 On safety of agricultural or forestry operation vehicles and trailer

TR CU 031/2012 On safety of agricultural or forestry operation vehicles and trailer

The Technical Regulation TR CU 031/2012 is intended to ensure the uniform application and enforcement of the requirements for agricultural and forestry vehicles and trailers, their components and compliance with the permissible emission standards. The conformity assessment takes place only in form of EAC certificate.

Learn more »

Attractions

TR EAEU 038/2016 On safety of attractions

TR EAEU 038/2016 On safety of attractions

The rules contain binding security requirements for mobile, temporarily installed or established attractions with the risk potentials RB-1, RB-2 and RB-3. Depending on the nature of the product, an EAC certification is mandatory.

Learn more »


Please feel free to call us or send us an email.

We will provide you with a free, non-binding quote and will be glad to answer all your questions.

In our video, we explain what an EAC Certification is and how and where to certify or declare your products for the introduction on the EAEU market.

The EAC Certification and the EAC Declaration are complex procedures that attest your products the conformity with the technical regulations of the EAEU and require a lot of know-how. Schmidt & Schmidt will support you with the certification of your products for the EAEU market.

The EAC certificate of the Eurasian Economic Union (EAEU) is an official document, that proofs the conformity of the products with the harmonized technical regulations of the member states of the EAEU. The products, whose conformity with the technical regulations could be confirmed by the certificate of the EAEU, may be moved and sold in the whole customs area of the member states of the EAEU.

The EAC Declaration of the Eurasian Economic Union (EAEU) is an official document that proofs, that the products meet the minimum requirements of the technical regulations of the EAEU. An EAC declaration is issued by the manufacturer, importer or an authorized representative and listed in the official register. Those products, whose conformity with the technical regulations are confirmed by the declaration, have the permission to be freely moved and sold in the whole customs territory of the member states of the EAEU.

The EAC certificate can only be issued after a quality assessment, which has to be carried out by a certification body accredited in one of the member states of the Eurasian Economic Union. The certification is conducted on the basis of technical documentations, company-internal created test reports, or rather test reports provided by accredited test laboratories, as well as on basis of a manufacturing audit on site. The certificate is printed on an official pre-printed form, which has several forgery-proof elements and is authenticated by the signature and seal of an accredited body. The EAC certificate is usually issued for “complex” products that require an extensive control by the authorities.

With the EAC Declaration the manufacturer, importer or authorized representative declares the conformity of his products with the minimum requirements of the technical regulation of the Eurasian Economic Union (EAEU). As distinguished from the EAC certificate, the EAC declaration is issued by the manufacturer or importer himself. All necessary tests and analysis are or made by the manufacturer or in some cases by the laboratory. The applicant issues the EAC declaration himself on a usual piece of paper. The EAC declaration has to be listed in the uniform register of the EAEU by an accredited certification body of one of the member states of the EAEU.

Qualified team of experts and consultants

Our experts have many years of experience in export and certification

Certification of all product types

We work with clients from all branches of industry

Quick processing of orders

We handle client's needs individually and process the requests quickly

Profound knowledge of technical regulations

Due to our technical and legal know-how, we guarantee high quality of services

Free delivery of documents

Your documents will be provided free of charge in the shortest possible time

News

The Technical Regulation 041/2017 will come into force at a later date

The Technical Regulation 041/2017 will come into force at a later date

15.04.2021

The Technical Regulation TR CU 041/2017 "On Safety of Chemicals" should come into force in Russia on June 2nd, 2021.

The lists of requirements for the testing and certification bodies have been updated

The lists of requirements for the testing and certification bodies have been updated

15.04.2021

On March 31, 2021, the Resolution of the Ministry of Economic Development of the Russian Federation No. 34 "On Approval of the List of Non-Conformities with Accreditation Criteria Leading the Revocation of Accreditation and the List of Non-Conformities with the Requirements of the Legislation of the Russian Federation for Activities of accredited bodies that result in the blocking of accreditation" was published on January 28, 2021.

A new standard for the oil and gas industry

A new standard for the oil and gas industry

13.04.2021

GOST R 59411-2021 “Glass fiber reinforced plastic pipes for industrial use. Construction and Operating Rules” has been approved on behalf of Rosstandart. This standard has thus become the first document to promote the use of non-metallic pipes in the oil and gas industry.

What to look out for when applying for EAC certification

What to look out for when applying for EAC certification

08.04.2021

Despite sanctions and political disputes, the Eurasian and especially the Russian market remain attractive for many european manufacturers. The corresponding conformity assessment - EAC certification or EAC declaration - is a major obstacle for many foreign entrepreneurs due to its complexity, language differences and the very dynamic development of technical regulations and legislation in the field of industrial safety and consumer protection.