On April 8, 2026, Decision No. 36 of the Council of the Eurasian Economic Commission (EEC) dated March 13, 2026, was officially published. This decision introduces significant amendments to the Technical Regulation of the Customs Union "On the safety of machinery and equipment" (TR CU 010/2011).
The certification authorities in the Eurasian Uion have begun cleaning up the EAC certification market by annulling EAC certificates that were issued in violation of regulations. This concerns documents issued by certification bodies that systematically ignored the legal requirements of the technical regulations and issued certificates without conducting real testing.
Very important updates in technical regulation for cosmetics TR CU 009/2011 came into force on December 24, 2025. They concern products, tests, labeling, packages, and standards.
In addition to EAC certification, for many product groups delivered to Russia, the digital marking in the “Chestny ZNAK” system has also been mandatory for several years. This traceability system, introduced by the Government of the Russian Federation, is based on a Data Matrix code that uniquely identifies each individual product unit and registers it in a central database. The aim is to remove counterfeit goods, smuggled goods, and non-compliant products from circulation and to ensure full transparency along the supply chain.
The lifting technology market in Russia is facing a major change in 2025 – the government is tightening the requirements for EAC certification. This aims to eliminate unsafe products from the market and protect consumers.
Up to half of all EAC certificates issued may soon be declared invalid. What can be done to prevent this from happening with purchased EAC certificates?
During an inspection of the five largest certification bodies in the Eurasian Economic Union in July 2023, significant deficiencies were found in 46.8% of the audit reports used as a basis for issuing EAC certificates.
The sanctions imposed by the EU and the USA against Russia and Belarus, including trade embargoes, asset freezes, and restrictions on financial transactions, can directly affect the EAC certification process.
We help carry out conformity assessment in Kazakhstan. We already have an office in Kazakhstan that is capable of testing product samples and conducting EAC certification, as well as assuming the duties of an authorized representative.
By September 1, 2023, simplified requirements for marking products with the EAC mark will be introduced according to the decision of the Council of the Eurasian Economic Commission.
A draft amendment to the Law on Organic Products has been submitted to the State Duma of the Federal Assembly of the Russian Federation for consideration. It is proposed to allow producers of organic products to use the terms 'eco' and 'bio' on packaging, as well as the words 'organic', 'biodynamic' etc.
When EAC certificates or EAC declarations are issued with violations of the law, this will inevitably result in the invalidity of the issued certificates of conformity.
It is impossible to import products, which are subject to the marking system “Chestny ZNAK”, into the EAEU territory, to carry out the conformity assessment procedures (e.g. in form of EAC Certification, EAC Declaration or state registration) and to sell them without such labeling.
Major shoe manufacturers and exporters have stopped delivering to Belarus. You explain the delivery failure with problems with the compulsory labeling of goods after the successful EAC conformity assessment, which the Belarusian authorities introduced on November 1st.
On 25 November 2020, the decision of the Eurasian Economic Commission (EEC) No. 146 of 17 November 2020 was officially published.
This decision establishes the transitional periods for the entry into force of the technical regulation TR EAEU 048/2019 On the energy efficiency requirements for energy consuming appliances.
The Association of the Children's Goods Industry (AIDT) has initiated a new GOST for environmentally friendly toys. The document is being developed with the participation of experts from Rosstandart and the Ministry of Industry and Trade.
On September 24 the Federal Law of December 27, 2019 N 496-FZ “On Amendments to the Federal Law to ensure uniformity of measurements” comes into force. According to the changes in the current legislation on metrology, the registration of metrological certificates (pattern approval certificate) shall be electronic.
By December 1 the Ministry of Industry and Trade will submit to the Government of the Russian Federation draft amendments to Decree no. 982 of December 1, 2009 “Uniform List of Products Subject to Certification and Declaration”.
On September 16 a public discussion on the decision of the Council of the Eurasian Economic Commission (EEC) no. 144 of August 8, 2019, has begun. In this decision the draft technical regulation TR EAEU 048/2019 The requirements for the energy efficiency of energy-consuming devices was approved.
The Ministry of economic development of the Russian Federation submitted to the Eurasian Economic Commission (EEC) a proposal to postpone the entry into force of the technical regulation TR EAEU 047/2018 “On safety of alcoholic beverages”.
On September 4, 2020 a regular meeting of the Council of the Eurasian Economic Commission took place, at which it was decided to supplement the plan for the development of technical regulations of the EAEU by amendments to Technical Regulations TR CU 008/2011 “On the safety of toys”.
Rosstandart has approved the national norm GOST R 59010-2020 “Equipment and covering for playgrounds.Additional safety requirements and test methods for universal playground devices".
The Council of the Eurasian Economic Union has included changes on the technical regulation TR CU 016/2011 On safety of appliances burning gaseous fuels in the plan for the development of technical regulations of the Eurasian Economic Union.
The Ministry of Industry and Trade in Russia approved the drafts for the technical regulation of high voltage equipment. The public discussion on the draft of the technical regulation of the Eurasian Economic Union (TR EAEU) “On safety of high voltage equipment” has already began on April 24, 2018.
Since July 3, 2020 the accreditation body in Russia compares number and date of test reports of the accredited certification body with the data in the FGIS system entered by the laboratory. Such data is registered in the register of EAC conformity proofs.
From 1 June 2020 on, in all member states of the EAEU the uniform safety requirements for equipment on playgrounds according to TR EAEU 042/2017 “On safety of children's playgrounds” will be valid.
Due to the Corona pandemy the demand for face masks has inscreased rapidly. On April 9, 2020 Rosstandart announced on his website the most important standards and requirements for face masks.
You have decided to sell your goods on the russian market and have already found a business partner in Russia. It turned out, that your product underlies the EAC conformity assessment and shall be assessed within the framework of the technical regulation. Therefore you have to send your samples to the laboratory in Russia.
In the course of the corona pandemic, the federal accreditation authority Rosskkreditazija plans to develop recommendations about possibility of remote inspection controls and production audits.
The Council of the Eurasian Economic Commission (EEC) carried the Technical Regulation of the Eurasian Economic Union (EAEU) “On the requirements for the energy efficiency of energy-consuming devices” in the August 2019.
The attestation of conformity according to the requirements of technical regulations and standards of is one of the conditions for the export of products requiring conformity to Russia and other member states of the Eurasian Economic Union (Belarus, Kazakhstan, Armenia and Kyrgyzstan).
The compliance with standards of the technical regulation is indispensable for the import of products subject to conformity to Russia and other member states of the Eurasian Economic Union.