Agricultural and forestry vehicles and trailers and their components may only be placed on the market of Russia and the Eurasian Economic Union (EAEU) if these meet the requirements of this and other Technical Regulations of the EAEU and the conformity of the products was confirmed by the EAC marking.
The EAC Certification is required only for new agricultural equipment. Used agricultural equipment is not subject to any conformity assessment.

Legal Framework

For new agricultural equipment two technical regulations of the Eurasian Economic Union are crucial:

  1. TR CU 031/2012 On safety of agricultural or forestry operation vehicles and trailers
  2. TR CU 010/2011 On safety of machinery and equipment

These technical documents set the binding safety requirements applied to agricultural, forestry vehicles and trailers and their components with the aim to protect life, health, the environment and property. They also serve to prevent misleading actions with regard to their intended use and safety toward the consumer.

Agricultural equipment which is subject to TR CU 010/2011 is listed in the Supplement 3 to the technical regulation, for example small horticultural and forestry equipment, machines for livestock, poultry farming and feed production. These agricultural machines underly obligatory EAC Certification. For industrial tractors only the EAC Declaration is possible.

TR CU 031/2012 applies to wheeled agricultural and forestry tractors and their trailers, regardless of their country of origin, as well as their components. This technical document stipulates only the EAC Certification.

The conformity assessment process

The conformity assessment with the requirements of the Technical Regulation TR CU 031/2012 On safety of agricultural or forestry operation vehicles and trailers is carried out in the form of the EAC Certification. The choice of an appropriate scheme depends on the art of production:

  • series production - Scheme 1c
  • serial delivery - Scheme 3c
  • single-unit production - Scheme 4c

The certification is carried out exclusively by notified bodies, which are registered as such in the uniform register of notified bodies and test laboratories of the EAEU.

In Supplement 2 to TR CU 031/2012 there are additional safety requirements for certain groups of agricultural equipment. The following requirements are mandatory:

  • visibility and accessibility of machine controls
  • steering system: reduced effort on the steering wheel or control levers
  • engine start: impossibility of arbitrary movement of the machine
  • driver protection if the vehicle has a sprayer
  • processes of reducing speed, stopping, braking and keeping stationary in order to ensure safety stipulated by operational manuals, load level, speed of movement

Accompanying documents

The supporting documents must be submitted in Russian or in the official language of the member state of the customs union. The accompanying documents include:

  • technical description and documentation
  • design documents (drawings and diagrams)
  • instruction manual
  • list of security features
  • delivery contract
  • test reports
  • data sheet

Text of TR CU 010/2011 On safety of machinery and equipment in Russian
Text of TR CU 031/2012 On safety of agricultural or forestry operation vehicles and trailers in Russian

Authorized representative

 Authorized representative The manufacturer, which is not established in one of the Member States of the Eurasian Economic Union, is not entitled to apply for any EAC conformity certificate.
In accordance with applicable law and in accordance with the technical regulations of the Eurasian Economic Union, only an entrepreneur residing in the territory of the Customs Union may be designated as an authorized representative.
In order to get the conformity certificate, the foreign manufacturer must appoint an authorized representative in one of the countries of the Eurasian Economic Union. He represents the interests in the certifying bodies of the Eurasian Economic Union regarding the safety and quality of products and compliance with technical regulations. Our company - Schmidt & Schmidt - offers you an authorized representative on the territory of the Eurasian Economic Union.

EAC marking

EAC Certification of agricultural equipment

The products declared according to technical regulations of the Eurasian Economic Union must be marked with the EAC conformity mark before placing on the market. The conformity mark shall be affixed to each unit and (or) shipping documents. The marking must be carried out in such a way that it is easily recognizable and legible throughout the entire shelf life of the product. Appropriate marking may only be made if the corresponding production meets the requirements of all relevant technical regulations.

Time duration and costs of the conformity assessment procedure

Time duration and costs of the conformity assessment procedure depend on many factors such as product type, complexity of tests needed etc.
The exact conditions of the conformity assessment procedure are always determined individually on the basis of the documents received.
The conformity assessment process can take a few weeks.

Delivery of Documents

You will receive a copy of the EAC certificate or EAC declaration by e-mail immediately after the procedure has been successfully completed. In just a few days, the original will be delivered to you by post.

Our export consultants have many years of experience in the import of goods to Russia and its customs processing. We offer a comprehensive service package, which includes the preparation of all necessary documents, the corresponding customs handling, and the logistics. We will help you acquire necessary certificates and permits.

We offer:

Your benefits

We rely on the German commercial tradition of management. Responsibility, competence and loyalty are not empty words for us, but the basis of our commercial philosophy. Our customers choose us because we prove every day that our services are the right choice for those who appreciate both your time and money. That is why we guarantee:

  • personal handling of each order
  • transparency
  • high quality of services
  • swift processing of your documents
  • free from defect of title

Our goal is to establish a mutually beneficial business relationship with all of our clients and partners.

We are pleased to provide you with professional and qualified assistance and are at your disposal for further information or questions concerning the import and certification procedure.

In our video, we explain what an EAC Certification is and how and where to certify or declare your products for the introduction on the EAEU market.

The EAC Certification and the EAC Declaration are complex procedures that attest your products the conformity with the technical regulations of the EAEU and require a lot of know-how. Schmidt & Schmidt will support you with the certification of your products for the EAEU market.


The rules on certification in Russia and the EAEU change frequently. We are committed to keeping you up to date with the regulatory requirements even after our cooperation. For this purpose, we offer you the option of subscribing to a newsletter that will keep you reliably informed of any changes.

All personal Data of the user are stored exclusively for the delivery of newsletters. The consent is revocable at any time under, which leads to a deletion of the collected user data. The data will only be stored as long as they are needed for the purpose mentioned. For more information see our Privacy Policy.
SEPA Bank Transfer

Qualified team of experts and consultants

Our experts have many years of experience in export and certification

Certification of all product types

We work with clients from all branches of industry

Quick processing of orders

We handle client's needs individually and process the requests quickly

Profound knowledge of technical regulations

Due to our technical and legal know-how, we guarantee high quality of services

Free delivery of documents

Your documents will be provided free of charge in the shortest possible time