In mid-July 2025, the results of the meeting between the President of the Russian Federation and representatives of the Russian business community, which took place on May 26, 2025, were published. Important directives were decided at the meeting, concerning the field of product conformity assessment
Already last year, internal consultations among Kazakh authorities discussed limiting the validity of EAC certificates issued in Kyrgyzstan for placing products on the market. Now, the signs are intensifying: the import of Kyrgyz-certified goods is expected to become significantly more difficult — a step that could have far-reaching consequences for manufacturers and exporters to the Eurasian Economic Union (EAEU).
Starting from September 1, 2025, the Technical Regulation of the Eurasian Economic Union TR EAEU 048/2019 On the Requirements for the Energy Efficiency of Energy-Consuming Devices will enter into force — with the exception of certain provisions.
Changes in the Technical Regulation TR CU 005/2011 On Safety of Packaging have come into force.
Packaging remains subject to EAC declaration. What is new is a clearer distinction between the types of packaging that are subject to declaration under schemes 3d, 4d, or 6d.
The obligation to declare used packaging has been abolished.
On March 1, 2025, new rules for the state registration of medical devices came into effect in Russia. The new rules are introduced by the Russian government decree No. 1684 dated November 30, 2024. These changes aim to simplify and digitalize the procedures but introduce additional requirements for manufacturers and suppliers. These changes apply only to the registration of medical devices according to Russian national regulations.
The lifting technology market in Russia is facing a major change in 2025 – the government is tightening the requirements for EAC certification. This aims to eliminate unsafe products from the market and protect consumers.
The Federal State Budgetary Institution "NIZ PM – Rostest" warns of numerous cases of forged test reports allegedly issued by the testing laboratory of its Sergiev Posad branch. This is an alarming signal for all participants of the EAC certification and EAC declaration procedures within the framework of importing goods into the Eurasian Economic Union (EAEU).
The Certification Oversight Authority has announced new measures to intensify inspection controls for certified products. This initiative, announced on May 2, 2024, aims to strengthen the verification of the authenticity of EAC certificates. This includes monitoring existing agreements between accredited certification bodies and authorized representatives, as well as conducting actual production audits at manufacturing sites and particularly inspection controls.
Up to half of all EAC certificates issued may soon be declared invalid. What can be done to prevent this from happening with purchased EAC certificates?
During an inspection of the five largest certification bodies in the Eurasian Economic Union in July 2023, significant deficiencies were found in 46.8% of the audit reports used as a basis for issuing EAC certificates.
Products sold on the Eurasian market (Armenia, Belarus, Kazakhstan, Kyrgyzstan, Russia) must be safe for consumers and the environment. In order to confirm the safety of products, there are a number of procedures to describe which in the commonly used sense the concept “certification” is usually used, although it is not entirely correct.
The sanctions imposed by the EU and the USA against Russia and Belarus, including trade embargoes, asset freezes, and restrictions on financial transactions, can directly affect the EAC certification process.
We help carry out conformity assessment in Kazakhstan. We already have an office in Kazakhstan that is capable of testing product samples and conducting EAC certification, as well as assuming the duties of an authorized representative.
The EAC certification is an approval process for a wide range of products, including machinery, electronic devices, food, and medical equipment. It confirms the conformity of products with the technical standards of the Eurasian Economic Union (EAEU).
In Kyrgyzstan, as a member state of the EAEU, EAC certification is mandatory.
This article explores the complexities of EAC certification during sanctions and offers guidance on how to navigate this intricate landscape. We offer several strategies on how to obtain the EAC certification in other countries.
In recent times, there has been an increase in cases of counterfeit test reports. A test report is an important component of EAC certification, as it proves that the product meets the required standards.
As a member of the EAEU since January 2, 2015, Armenia adheres to the common technical regulations and standards of the Eurasian Economic Union (EAEU).
By order of the Federal Agency for Technical Regulation and Metrology, a new national standard of the Russian Federation GOST R 70650-2023 "Plant-based beverages (from grain, nuts, coconut). General specifications." was adopted. The document will come into force on 1 May 2023.
As of March 1, there are new regulations regarding the approval of communication devices. A new government decree N 1387, dated August 5, 2022, came into force on March 1.
The member states of the Eurasian Economic Union (Russia, Kazakhstan, Belarus, Armenia and Kyrgyzstan) have decided to develop new requirements for toys that may affect children's mental development.
For some registrations for the Eurasian market, translated and certified documents are requested from the foreign manufacturers. Thus, incorrectly certified documents can lead to delays or even refusal of registration.
On November 25, 2022, Resolution of the Board of the Eurasian Economic Commission (EEC) No. 181 of November 22, 2022 was published. With this, a new program for the development (amendment, revision) of standards for the Technical regulation TR CU 004/2011 On safety of low-voltage equipment was approved.
By September 1, 2023, simplified requirements for marking products with the EAC mark will be introduced according to the decision of the Council of the Eurasian Economic Commission.
The new edition sets a date from March 21, 2022 to September 1, 2023, within which compliance with mandatory requirements will be ensured for the EAC declaration in a simplified form.
On July 20, 2022, the text of Decree No. 105 of July 13, 2022 “On changes to the unified list of products subject to mandatory EAC conformity assessment” was published.
A draft amendment to the Law on Organic Products has been submitted to the State Duma of the Federal Assembly of the Russian Federation for consideration. It is proposed to allow producers of organic products to use the terms 'eco' and 'bio' on packaging, as well as the words 'organic', 'biodynamic' etc.
The Center for Standardization, Metrology and Testing in the Rostov region has developed a new standard GOST R 70135-2022. Thus, for the first time, the rules for organizing trade fair activities in Russia will be introduced.
This proposes to approve temporary measures (for a period of one year) to streamline the procedures for assessing compliance with requirements of technical regulations.
The draft proposes to expand the schemes of the EAC conformity assessment with the rules of a temporary procedure for confirming compliance with the requirements of the technical regulations of the to supplement EAEU in relation to e-commerce goods.
One mesage was posted on the Rosaccreditation website on November 17, 2021. This communicated that it is currently possible to transfer the EAC certificate to another certification body.
The European Commission has recognized 9 harmonized standards from the International Organization for Standardization (ISO) and the International Electrical Commission (IEC) related to medical devices. These ISO and IEC documents are used unchanged like European standards EN ISO or EN IEC.
This article will outline what the scheme of the EAC declaration 1d is, what its features are, what are the difficulties with its use can occur and also how it differs from other schemes (particularly scheme 3d).
The members of the Council of the Eurasian Economic Union have a new version of the procedure for developing and adopting standards necessary for the application and implementation of the requirements of the technical regulations of the EAEU.
For Russian and Eurasian legislation, the applicant for EAC certification and EAC declaration is a central figure who bears full responsibility for possible violations.
On April 5, 2022, the Resolution of the Ministry of Industry and Trade dated March 25, 2022 No. 1003 "On Approval of the List of Products with Indicated Customs Tariff Numbers" came into force.
Due to a lack of attention when filling out documents, typing errors, but also due to changes in the important information in the organization of the applicant and/or manufacturer, the question arises of how changes to EAC certificates and EAC declarations, which have already been issued, can be made.
When EAC certificates or EAC declarations are issued with violations of the law, this will inevitably result in the invalidity of the issued certificates of conformity.
The document stipulates the automatic extension of the validity of certificates of conformity by 12 months and their simplified issuance in the current year.
On February 8, 2022, the Board of Directors of the Eurasian Economic Commission began discussing changes in the procedure for developing the standards of the Technical Regulation TR CU TR CU 005/2011 On safety of packaging, including the procedure for conformity assessment.
This approved the list of energy-consuming devices for which compliance with technical regulations must be checked and the confirmations of conformity (in the form of a EAC certificate or an EAC declaration) must be issued.
On January 21, 2022, a notice to extend the temporary measures for EAC certification during the pandemic was published on the website of the Ministry of Industry and Trade.
The Government of the Russian Federation has approved new lists: the Unified List of Products subject to mandatory EAC Certification and to EAC Declaration.
The technical regulation relates to the requirements for marking and regulations for their use as well as forms, schemes and procedures for conformity assessment in the form of, for example, EAC certification or EAC declaration
The Prime Minister of the Russian Federation, Mikhail Mishustin, chaired a weekly meeting of the Presidium of the Coordinating Council of the Government to Combat the Spread of the New Coronavirus Infection in Russia.
It is impossible to import products, which are subject to the marking system “Chestny ZNAK”, into the EAEU territory, to carry out the conformity assessment procedures (e.g. in form of EAC Certification, EAC Declaration or state registration) and to sell them without such labeling.
On November 17, 2021, a notification was published on the website of Rosakkreditierung (Federal Service for Accreditation). This introduced the option of transferring the EAC certificate to a new certification body.
Major shoe manufacturers and exporters have stopped delivering to Belarus. You explain the delivery failure with problems with the compulsory labeling of goods after the successful EAC conformity assessment, which the Belarusian authorities introduced on November 1st.
This defines the necessary information that accredited testing laboratories have to submit to Rosaccreditation for the mandatory EAC conformity assessment.
On November 11, 2021, the Government of the Russian Federation Ordinance No. 1923 of November 9, 2021 was published. The procedure for creating and maintaining a uniform register of expert auditors was thus approved.
On November 8, 2021, the decision of the Council of the Eurasian Economic Commission No. 100 "On the technical regulations of the Eurasian Economic Union" On the safety of products for civil protection and protection against natural and man-made emergencies" was published. The Technical Regulation set minimum requirements for the safety of products during the EAC Certification, EAC Declaration or state registration.
During the speech at the International Customs Forum 2021, the head of the national accreditation body announced the creation of a service to track the import of product samples in the course of EAC conformity assessment.
On October 27, 2021 the public discussion of the board of the Eurasian Economic Commission “On changes to the list of products for which, in addition to customs declarations, a certificate of conformity such as an EAC certificate or EAC declaration (or information about it) is required".
The Council of the Eurasian Economic Commission has decided to gradually introduce labeling in the “Chestny ZNAK” system (Честный знак - honest sign) for bottled water in the countries of the Eurasian Economic Union (EAEU). This marking is required for the implementation of the EAC conformity assessment.
Products to be placed on the market in Russia and the Eurasian Economic Union for the first time are subject to the conformity assessment in form of an EAC certification or EAC declaration. If the conformity check is successful, the products must be marked with the EAC conformity mark.
On October 6, 2021, the public discussion of the draft of the board of the Eurasian Economic Union “On amendment of the resolution of the board of the Eurasian Economic Commission No.
The national identification system "Chestny ZNAK" aims to eliminate counterfeit, contraband and sanctioned goods. This article is about what the goods labeling system "Chestny ZNAK" is, what role it plays in conformity assessment, and how goods must be labeled etc.
The Council of the Eurasian Economic Commission has adopted the technical regulation TR EAEU "On the safety of products for civil protection and protection against natural and man-made emergencies". The Technical Regulation set minimum requirements for the safety of products during the EAC Certification, EAC Declaration or state registration.
On October 5th, 2021, the public discussion of the Eurasian Economic Commission project began. This introduces changes to the technical regulations in the area of EAC certification.
On September 24, 2021, the regulation of the board of the Eurasian Economic Commission No. 143 of September 21, 2021 was published and came into force.
In the area of international trade, there is a tendency to simplify and standardize processes inside and outside the company. Systems with GLN and GTIN numbers have been introduced exactly for this purpose. This article is about what GLN and GTIN numbers are, what they are used for, what advantages they have and what role they play in the EAC conformity assessment.
A public discussion of the draft decision of the Economic Commission Council takes places from August 23 in Russia. This establishes the list of products for which, in addition to customs declarations, a certificate of conformity is required. The certificate of conformity for vehicles (EAC certificate or EAC declaration) is an official confirmation that the products meet the requirements of the technical regulations TR CU 018/2011 "On the safety of wheeled vehicles".
On August 20, 2021, information on the creation of a Regional Organization of Accreditation (ROA) was published on the website of the Eurasian Economic Union. The Organisation which will act in the interests of the EAEU countries in the region. In order to export the products to the EAEU countries, a certificate of conformity (EAC certificate, EAC declaration, certificate of state registration ) necessary.
Due to the EAC certification and EAC declaration it is established that a product or service meets the requirements of technical regulations, standards and other official documents. The EAC certification is carried out by authorized, accredited bodies with subsequent issuance of an EAC certificate. The EAC declaration is drawn up by the domestic manufacturer, importer or an authorized representative of a foreign manufacturer and entered in the uniform register.
On August 23, 2021, a public discussion began on the draft resolution of the board of the Eurasian Economic Union "On changes to the resolution of the board of the Eurasian Economic Commission No. 30 of April 12, 2016". This approved the list of products for which the submission of a certificate of conformity in accordance with the technical regulation TR CU 031/2012 is required.
On August 18, 2021, recommendations on the choice of clothes for children and adolescents were published on the website of the Federal Service for the Supervision of the Protection of Consumer Rights and Consumer Welfare (Rospotrebnadzor). The forms of attestation of conformity of clothing for children and adolescents are state registration, EAC Certification, EAC Declaration.
On September 5, 2021 the decision of the board of the Eurasian Economic Commission No. 99 “On amendment of section 20 of chapter II of the uniform sanitary and epidemiological and hygienic requirements for products (goods) under hygienic and epidemiological supervision (control)” comes into force. Depending on the type of disinfectant, there are different types of confirmation of conformity. State hygienic registration is one of the most widespread forms in the Russian Federation.
On August 16, 2021, a public discussion began on the draft of the list of products, with a certificate of conformity e.g. EAC Declaration (or information on it) on compliance with the requirements of TRs EAEU 036/2016 "On the requirements for gaseous fuel" except for the customs declaration is required.
On July 30, 2021, the Decree of the Government of the Russian Federation No. 1265 "On Approval of Rules for Compulsory Conformity Assessment of Products" was published and came into force. It concerns the products listed in the first paragraph of Section 3 in are listed in Article 46 of the Federal Act "On Technical Regulations" of July 24, 2021.
On July 30, 2021, the regulation of the board of the Eurasian Economic Commission regarding the technical regulations for high-voltage electrical equipment came into force. The draft of the technical regulations "On the safety of high-voltage electrical equipment" was approved.
The EAEU has developed a program to update the standards for the technical regulation TR CU 034/2013. The technical regulations contain safety requirements for meat and meat products.
From July 21 to August 10, 2021, there will be a public discussion on the draft to amend the resolution of the Board of Directors of the Eurasian Economic Commission No.12 of January 22, 2019.
On July 21, 2021, a public discussion began on the draft of the amendments to the resolution of the Board of Directors of the Eurasian Economic Commission No. 41 of March 20, 2018.
On July 19, 2021, a public discussion began on two draft amendments to the lists of foods for which a confirmation of conformity (or information on such a document) must be submitted in addition to
Autonomous non-profit organization "Russian Quality System" (Roskachestvo) examined the underpants of 20 brands of lingerie. Infringements were found in half of the brands examined.
On July 16, 2021, the decision of the board of directors of the Eurasian Economic Commission No. 86 of July 13, 2021 was published. The updated lists of the standards according to TR CU 016/2011 "On the safety of appliances burning gaseous fuels" were approved. The document comes into force six months after the date of its official publication.
Since July 7th, the project of the board of the Eurasian Economic Commission "On changes to the resolution of the board of the Eurasian Economic Commission No. 79 of June 13, 2012" has been discussed. With this decision, the list of products was approved for which a certificate of conformity (or information on the certificate of conformity) is required with the submission of the customs declaration.
The board of the Eurasian Economic Commission approved a new version of the program for the development of standards for the technical regulation for oil and fat products.
On July 2, 2021, the decision of the board of directors of the Eurasian Economic Commission No. 77 of June 29, 2021 was published. The document contains the lists of international and regional standards according to TR CU 020/2011 "On electromagnetic compatibility".
On June 21, 2021, Resolution of the Government of the Russian Federation No. 935 of June 19, 2021 was published and came into force immediately. The document changes the procedure for establishing and maintaining a unified register of certificates of conformity, for providing information contained in the specified register, and for paying for the provision of that information.
On June 21, 2021, the official publication of the Resolution of the Government of the Russian Federation No. 936 of June 19, 2021 was published. This created new procedures for the suspension, renewal, revocation and declaration of invalidity of EAC certificates and EAC declarations detected.
On June 8, 2021, the decision of the Council of the Eurasian Economic Commission No. 57 of April 23, 2021 was published. A new plan for the development and revision of the technical regulations of the Eurasian Economic Union (TR EAEU) was approved.
On June 1, 2021, the decision of the board of directors of the Eurasian Economic Commission No. 58 of May 25, 2021 was officially published. A new program for the development of standards of the Technical Regulation 016/2011 was thus approved.
New standards for the technical regulation TR CU 016/2011 On the safety of gas operated devices are being developed and updated. The standards determine the requirements of TR CU 016/2011.
Since the counterfeiting of building materials has spread widely in the EAEU market, the list of products requiring EAC certification is being expanded for later export to the EAEU countries.
During the corona pandemic, many Russians realized how important it is for home improvement to create coziness and comfortable conditions not only for recreation, but also for working from home. The demand for furniture and furnishings in Russia increased therefore by 48%.
The changes concern the indication of the GLN and GTIN numbers when entering the information for the registration of the EAC declaration with the Federal State Information System (FGIS) of the Rosaccreditation
From April 29 to May 29, 2021, the changes to the procedure for the elaboration, adoption, amendment and repeal of the technical regulations of the EAEU will be publicly discussed in Russia.
From April 22 to June 11, 2021, the changes in the procedure for creating and maintaining the register of the issued EAC Certificates and EAC Declarations will be publicly discussed.
On January 29, 2021, the decision of the Ministry of Economic Development and Trade No. 877 of December 30, 2020 was published. It contains changes to the decision No. 478 of July 31, 2020 regarding the manufacturer's GLN number and the GTIN number of the products during the EAC Declaration.
More than 80% of the clothes and shoes sold in Russia are imported from numerous countries around the world. In addition, the sales volume continues to grow from year to year.
Am 30. April 2021 hat eine öffentliche Diskussion über die Entwürfe der Änderungen im TR ZU 007/2011 "Über die Sicherheit von Produkten für Kinder und Jugendliche" in Russland begonnen. Die Diskussion soll am 30. Juli 2021 enden.
On April 22, the Council of the Eurasian Economic Commission approved a new version of the plan to develop and amend the Technical Regulations of the Eurasian Economic Union. According to the plan, 11 new Technical Regulations will be created and changes will be made to 42 existing Technical Regulations .
At the meeting on April 22nd, the Council of the Eurasian Economic Commission decided to change the Technical Regulations TR CU "On Safety of Pressure Equipment". The changes include the terms of the Technical Regulation, the scope of the TR as well as technical corrections.
On April 15, 2021, a draft of the government of the Russian Federation was submitted for public discussion. It concerns the procedure for the suspension, renewal, declaration of invalidity and revocation of the EAC certificates and EAC declarations.
The Federal Agency for Technical Regulation and Metrology in Russia (Rosstandart) approved GOST R 59424-2021 "Guidelines for remote analysis of the state of production and testing of management systems"
On April 9, 2021, the decision of the board of the Eurasian Economic Commission No. 39 of April 6, 2021 was published. The transitional provisions for the implementation of TR EAEU 049/2020 “On the requirements for pipelines for the transport of liquid and gaseous hydrocarbons” were approved.
On February 8, 2021, a public discussion began on the draft standards in the Technical Regulation TR EAEU 049/2020 "The requirements for pipelines for the transport of liquid and gaseous hydrocarbons".
Despite sanctions and political disputes, the Eurasian and especially the Russian market remain attractive for many european manufacturers. The corresponding conformity assessment - EAC certification or EAC declaration - is a major obstacle for many foreign entrepreneurs due to its complexity, language differences and the very dynamic development of technical regulations and legislation in the field of industrial safety and consumer protection.
On March 12, 2021, the Decision No. 28 of March 9, 2021 of the Eurasian Economic Commission was published. It means that new standards have been passed that have established the new requirements of TR CU 010/2011 “On the safety of machines and systems”.
The responsible bodies of the members of the Eurasian Economic Union (EAEU) held a working session on March 18, 2021. The main topic of the working session was the transition to the electronic certificates of conformity.
On March 4, 2021, the Deputy Minister of the Ministry of Industry and Trade of the Russian Federation sent a letter to the Deputy Minister of the Ministry of Economic Development and Trade of the Russian Federation. The letter concerned the revision of the criteria for the inclusion of the EAC certification bodies and testing laboratories in the unified register, Initial criteria were approved by the Order of the Government of the Russian Federation No. 1236 of September 21, 2019.
On January 1, 2021, the Ordinance of Rostechnadzor No. 536 of December 15, 2020 came into force in Russia approving new rules for operational safety when using pressure equipment.
On February 18, 2021, a public discussion began in the Council of the Eurasian Economic Union. The project for the formation and introduction of the Register of chemical substances and mixtures of the Eurasian Economic Union, as well as the notification of new chemicals is on the agenda.
On January 1, 2021, a new procedure for registration of EAC declarations approved by Decision of the Ministry of Economic Development and Trade No. 478 of July 31, 2020, came into effect.
Since January 1st, 2021 significant changes apply to the process of registering EAC certificates and EAC declarations. Here are the most important points at one glance.
On January 10, 2021, the Eurasian Economic Commission (EEC) Council Decision No. 127 of December 23, 2020, approving temporary measures for EAC certification related to the spread of COVID-19, entered into force.
On January 1, 2021, a new procedure for registration of EAC declarations approved by Decision of the Ministry of Economic Development and Trade No. 478 of July 31, 2020 came into effect. EAC declarations must be independently registered by applicants through the electronic service FSIS Rosaccreditation.
On december 8, 2020 a public discussion on two draft decisions of the Eurasian Economic Union (EEC) Board began.
They concern changes in the rules for issuing EAC certificates and declarations.
The 3% reduction of VAT to 16% introduced by the German government as part of the economic stimulus package to combat economic damage caused by the Corona crisis will end at the end of this year.
On 25 November 2020, the decision of the Eurasian Economic Commission (EEC) No. 146 of 17 November 2020 was officially published.
This decision establishes the transitional periods for the entry into force of the technical regulation TR EAEU 048/2019 On the energy efficiency requirements for energy consuming appliances.
On November 20, 2020, the Decree of the Government of the Russian Federation no. 1856 of November 18, 2020, in which the procedure for the creation and maintenance of a unified register of conformity certificates is specified, was officially published.
Until November 30, 2020, a public debate on the draft amendments to the technical regulations of the Customs Union TR CU 007/2011 On the safety of products for children and young people will be held.
The technical regulation TR CU 025/2012 On furniture safety is to be updated.
The amendments mainly concern product identification, which has to be carried out by the certification body in the presence of the applicant when an EAC certificate is obtained. The registration of the EAC declaration can be done by the manufacturer /official representative or seller as well as by the test laboratory.
On November 6, 2020 the fourth meeting of the Interdepartamental Council of National Quality Infrastructure took place.
During the meeting, the question of the possibility of accredited bodies to work in the field of mandatory conformity assessment with the requirements of the legislation of the Eurasian Economic Union was discussed. 17 newly accredited bodies were added to the national part of the single register and 425 accredited bodies confirmed their qualification. 171 accredited bodies have been excluded from the national part of the single register.
From 1 January 2021, a new GOST standard R 54293-2020 "Production audit within the framework of confirmation of conformity", approved by Rosstandart Decision No 583 of 28 August 2020, will come into force.
This standard will replace the old GOST R 54293-2010, which has been in use since 2010.
The new GOST-standard R 56016-2020 “Conformity assessment. The procedure for the compulsory attestation of product conformity with the requirements of the technical regulations of the Customs Union "On Food Safety” was developed as a replacement for the GOST standard R 56016-2014. This standard is used for the conformity assessment of products according to TR CU 021/2011 on food safety.
On November 16, 2020 a public discussion on the draft update of TR CU 017/2011 " On the safety of light industry products" has started. The regulations must be revised and adapted to the new standards.
The Eurasian Economic Commission drafted amendments to Commission Decision n. 125 of 26 September 2017, which provides for the extension of the fixed period of validity of the transitional period of the technical regulation TR EAEU TR 043/2017 "On requirements for fire retardants and fire-extinguishing systems".
The Association of the Children's Goods Industry (AIDT) has initiated a new GOST for environmentally friendly toys. The document is being developed with the participation of experts from Rosstandart and the Ministry of Industry and Trade.
The distribution of low quality or counterfeit products is a serious problem not only for the consumer, but also for the producer. The analysis of the Ministry of Industry and Trade of Russia confirms that more than 6 million units of counterfeit products have been identified on the russian market since 2018. Without a special system it was difficult to track the movement of such products. Therefore the “Fair Mark” system (Chestnyj ZNAK) was introduced.
On October 5, 2020 the decision of the Board of the Eurasian Economic Commission no. 118 of September 29, 2020 was published. This decision contains the list of revised norms of the technical regulation TR CU 018/2011 On safety of wheeled vehicles.
The Council of the Eurasian Economic Union has included changes on the technical regulation TR CU 016/2011 On safety of appliances burning gaseous fuels in the plan for the development of technical regulations of the Eurasian Economic Union.
The Ministry of Industry and Trade in Russia approved the drafts for the technical regulation of high voltage equipment. The public discussion on the draft of the technical regulation of the Eurasian Economic Union (TR EAEU) “On safety of high voltage equipment” has already began on April 24, 2018.
Since July 3, 2020 the accreditation body in Russia compares number and date of test reports of the accredited certification body with the data in the FGIS system entered by the laboratory. Such data is registered in the register of EAC conformity proofs.
On May 15, 2020 a public discussion on the development of standards that are necessary for the implementation TR CU 012/2011 "On the safety of EX equipment has begun.
From 1 June 2020 on, in all member states of the EAEU the uniform safety requirements for equipment on playgrounds according to TR EAEU 042/2017 “On safety of children's playgrounds” will be valid.
The Ministry of Industry and Trade and the Ministry of economic development of the Russian Federation recommended the regions to resume the work of the certification bodies and the laboratories.
The Ministry for Industry and Trade, the Ministry for economic development of the Russian Federation and the accreditation authority have elaborated some temporary recommendations for surveillance, manufacturing audits and sampling as well as an extension of the validity of certifications due to the spread of coronavirus.
It is not uncommon for the manufacturer to determine after registering the certificate of conformity - be it an EAC-certificate or an EAC-declaration - that the information in the certificate of co
The lists of standards are formed in order to ensure compliance with the requirements of the EAEU TR 044/2017 “On the safety of drinking water, including natural mineral water”.
A meeting of the State Commission on Counteraction of Illicit Traffic of Industrial Products, chaired by the Minister of Industry and Trade of the Russian Federation, Denis Manturov, was held.
On January 12, 2019, the decision №49 of the Eurasian Economic Union concerning the determination of the country of origin for the import of goods into EAEU-States came into force.
Towards the end of 2018, the Eurasian Economic Commission has issued new standards for all wheeled vehicles and their respective components. These Rules came into force on January 27, 2019.
On July 1, 2018, new rules have come into force that concern the creation of registration numbers for EAC declarations in the registers of the Federal Accreditation Service Rosakreditatsia.
The new technical regulation TR EAEU 043/2017 On requirements for fire safety and extinguishing devices has been passed. It shall enter into force on January 1, 2020 and thereby replace the national regulations. Until 2020, fire safety certificates of the respective country have to be applied for.
On May 17, 2017, the new technical regulation of the Eurasian Economic Union TR EAEU 042/2017 On safety of children's playgrounds has been passed. It contains the binding safety requirements for playground equipment, floor coverings for children's playgrounds, as well as rules for their project planning, assembly, use, transport, and recycling..
